K230 音视频编码

以下两个实验注意连接网线， 保证开发板和主机处于同一局域网下

或者使用@linglan111同学编写的连接脚本将开发板连接至wifi

#!/bin/sh

# Enable wlan0 interface
ifconfig wlan0 up

# Start wpa_supplicant with the specified configuration file
wpa_supplicant -D nl80211 -i wlan0 -c /etc/wpa_supplicant.conf -B

# Scan for available networks
wpa_cli -i wlan0 scan -B

# Display scan results
wpa_cli -i wlan0 scan_result

# Add a new network
wpa_cli -i wlan0 add_network

# Set the network parameters (replace ssid and psk with your actual values)
wpa_cli -i wlan0 set_network 1 psk '"11111111"'
wpa_cli -i wlan0 set_network 1 ssid '"Redmi Note 11T Pro"'

# Select the configured network
wpa_cli -i wlan0 select_network 1

# Obtain an IP address using udhcpc
udhcpc -i wlan0 -q
  • 使用方法
  1. 将net.sh复制进SD卡
    • 修改wifi密码和wifi名 
      wpa_cli -i wlan0 set_network 1 psk '"11111111"' # 密码
wpa_cli -i wlan0 set_network 1 ssid '"Redmi Note 11T Pro"' # wifi
  2. 进入linux小核，执行：
cd /sharefs
sh net.sh